核心參數 嗼擔ore parameters

JBS係列產品使用空氣彈簧作為減震元件，可單獨使用當配套高精度調平閥時，此時的工作高度為116士5mm

JBS series products use air springs as shock-absorbing elements and can be used alone. When equippedwith a high-precision leveling valve, the working height is 116±5mm.

整套係統配置Configuration of the whole system

基礎配置:>3個空氣彈簧(三點定麵原理，一般四個點往上成對設計)

Basic configuration: >3 air springs (three-point fixed surface principle, generally designed in pairs of fourpoints upwards)

擴展配置:多個空氣彈簧並聯時需保持3個水平調節閥

Extended configuration: When multiple air springs are connected in parallel, 3 horizontal regulating valvesmust be maintained

二、性能指標Performance indicators

垂直固有頻率:3-5Hz(與負載有關)

Verticalnaturalfrequency:3-5Hz(related to load)

水平固有頻率:3-5Hz(與負載剛度強相關)

Horizontalnaturalfrequency:2-5Hz(strongly related to loadstiffness)

整定時間:<1s

Settlingtime:<ls

水平精度:士0.05mm(配備Casby高精度調節閥)

Horizontal accuracy: ±0.05mm (equipped with Casby high-precision regulating valve)

防震等級:VC-B級

Shockproof level: VC-B

疲勞次數:空氣彈簧>100萬次(第三方檢測報告，符合GB/T13934-2006標準)

Fateue t:mesi alr spring ceo”dilion times (third,party test repone in ine with GB/T13934-2006 standard)

工作溫度：零下57℃-零上60℃

Workingtemperature: -57℃-60℃